Reduces Power Consumption - Panasonic TH-47LFT30W Operating Instructions Manual

Reduces power consumption

• Power management:
• No signal power off:
• No activity power off:
• Standby save:
• ECO:
1
2
3
32
When this function is set to On, it operates under the following conditions to turn the
power on or off automatically.
When no pictures are detected for 30 or so seconds during input from PC IN or
DVI-D IN terminal:
→ Power is turned off (standby); the power indicator lights up orange.
When pictures are subsequently detected:
→ Power is turned on; the power indicator lights up green.
Notes:
• This function operates only during input from PC IN or DVI-D IN terminal.
• This function is effective when "Sync" is set to "Auto" and during normal viewing (one
picture screen).
Equipment power supply is turned Off when there is no signal.
When this is set to "Enable", the power supply of the unit goes Off 10 minutes after
the input signals stop.
Note:
This function is effective during normal viewing (one picture screen).
When this function is set to "Enable", the power is turned off (standby) automatically
when there is no operation of the Display for 4 hours.
Starting from 3 minutes before the turn off, the remaining time will be displayed.
When the power is turned off due to this function, a message "Last turn off due to
'No activity power off'." is displayed next time the power is turned on.
Note:
During the screensaver is running, this function is disabled.
When this function is set to "On", serial communication is disabled during standby
mode, reducing the power consumption during standby.
To perform serial communication while in standby, set this function to "Off(SERIAL)".
However, the standby power consumption is greater than when it is set to "On".
Note:
The factory setting is "On".
This function adjusts the brightness of the backlight to reduce power consumption.
Off: This function does not operate.
On: Backlight brightness is reduced.
Sensor: The backlight brightness is automatically adjusted according to the viewing
environment.
* The "Sensor" setting can be only used for TH-47LFX30W.
Note:
When this function is set to "On" or "Sensor", the "Backlight" setting in the Picture
menu is disabled.
Press to select the menu to adjust.
Press to select "On (Enable)" or "Off (Disable)".
On (Enable) Off (Disable)
Press to exit from Setup.
Press any key to abort.
No activity power off 3min
Setup 1/2
Signal
Screensaver
Input label
Wobbling Off
Power management
On
No signal power off
Enable
No activity power off
Enable
Standby save
On
ECO
Off
English ( UK )
OSD Language