Options Adjustments - Panasonic TH-47LFT30W Operating Instructions Manual

Options Adjustments

1
2
3
4
5
Normalisation
When both main unit buttons and remote control are disabled due to the "Button lock" or "Remocon User level"
adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the button on main unit together with
The "Shipping" menu is displayed and the lock is released when it disappears.
Item
On: Displays all the following on screen.
• Power on display
• Input signal switch display
On screen display
• No signal display
• Mute and the remaining time of off-timer after
Off: Hides all the items above from view.
Adjusts the input signal when the unit is turned on.
Off
Notes:
Initial input
• Only the adjusted signal is displayed. (see page 17)
• This menu is available only when "Input lock" is "Off".
When there is no signal, the specifi ed input is automatically switched to.
Off
Failover input Notes:
• When other than "Off" is set, "Input lock" will be grayed out and cannot be set.
• When "Input lock" is set to other than "Off", this setting will be grayed out and cannot be set.
Press
Off
Off: Sets normal volume.
Initial VOL level
On: Sets your preferred volume.
Notes:
• When "Maximum VOL level" is "On", the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when "Initial VOL level" is "On" and cursor is on the menu.
Press
Off
Off: Sets auto maximum volume.
On: Sets your preferred maximum volume.
Maximum VOL level
Notes:
• If the "Maximum VOL level" is set lower than the "Initial VOL level", the "Initial VOL level" automatically
becomes the same as the "Maximum VOL level".
• The volume display can go up to 100 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when "Maximum VOL level" is "On" and cursor is on the menu.
Press to display the Setup menu.
Press to select "OSD Language".
Press for more than 3 seconds.
Press to select "Options".
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from Options menu.
PC DVI HDMI1
PC DVI HDMI1
button to adjust the volume when the unit is turned on.
On
button to adjust the maximum volume.
On
Options
Shipping
button on the remote control and hold for more than 5 seconds.
Adjustments
was pressed.
HDMI2 Off
HDMI2 Off
Options
On screen display On
Initial input Off
Failover input Off
Initial VOL level
Off 0
Maximum VOL level Off 0
Input lock Off
Button lock
Off
Remocon User level Off
Options
Off-timer function
Enable
Initial Power Mode
Normal
Power ON Screen Delay
Off
Clock Display
Off
Power On Message (No activity power off)
On
Winter Mode
Off
Power Switch Lock
Off
1/2
2/2
39