Charging The Shaver - Panasonic ES‑LF51 Operating Instructions Manual

Using the lock ring
Use the lock ring to lock or unlock the power switch.
Rotate the lock ring until it clicks.
Rotate the lock ring to " " to unlock the power
switch:
For when shaving, washing the shaver, lubricating
the shaver.
Rotate the lock ring to " " to lock the power
switch:
For when carrying the shaver.
Charge
Charging the shaver
1
1
Insert the appliance plug into the
shaver.
2
2
Plug in the AC adaptor into a
household outlet.
•
Turn the shaver off before attaching.
•
Charging is completed after approx. 1 hour.
You cannot operate the shaver while charging.
4
ES-LF51_EU.indb 4
Reading lamps when charging
While charging
The charge status lamp ( ) glows.
The number of the battery
capacity lamp will increase as
charging progresses.
• After charging is completed, turning the power switch ON with
the shaver plugged in will cause all the lamps to light up and then
turn off after 5 seconds. This shows that the shaver is fully
charged.
•
Recommended ambient temperature for charging is 5‑5 °C. The
battery may not charge properly or at all under extreme low or
high temperatures.
The charge status lamp ( ) will blink when there is a problem
with charging.
•
When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp (
may not glow. It will eventually glow if kept connected.
After charging is completed
All the lamps will light up and
then turn off after 5 seconds.
)
2011/03/03 16:21:04