Panasonic ICX User Manual page 27

OR
• Enter the Speed Dial Set/Clear code (default = 710 (HK/UK) or 710#).
3. Enter the PSD bin number (80-99).
4. Enter the phone number you want to be speed-dialled (maximum length = 16
characters). Remember to include the Intercom Level or MCO Code level code
depending on how the system is set up. (Refer to the following table.)
Table 5. Characters allowed when assigning PSD numbers
To insert a . . .
Digit or character
Intercom Level*
9 0
MCO Code (UK/HK), (Taiwan, Malaysia, Indo-
nesia) **
MCO Code 81**
MCO Code 82**
MCO Code 83**
MCO Code 84**
Pause
DP - DTMF Code
SSD Code
Hyphen (-)
Display Number (Start / Stop) ***
DTMF Conversion After the Other Party Answers
* Indicates that the digits that follow are either a feature access code or extension
number. (Do not include if system is set for Intercom Level.)
** Indicates that the digits that follow are for an outside number. (Do not include if
system is set for Trunk Level.)
***Indicates that the enclosed digits should not be displayed during dialling. Must
precede and follow the digits that you do not want displayed. Example: MEM-
ORY *2 555-4143 MEMORY *2.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
ICX-45-750 ICX (International), issued June 2000
2. Setting Up Your Phone
Enter/Press...
0, 1-9, *, #
MEMORY * #
MEMORY * 0
MEMORY * 71
MEMORY * 72
MEMORY * 73
MEMORY * 74
FL/R
MEMORY * *
MEMORY NN(N)
PROG
MEMORY * 2
MEMORY * 3 (Version 3.5
and higher)
27