Panasonic ICX User Manual page 40

2. Setting Up Your Phone
MEMORY PROG
7. Press to return to "81-User Maintenance" (step 1).
OR...
MEMORY ON/OFF
Press to exit User Maintenance.
To set the Special Day Modes using either a large-display
or small-display phone:
1. Enter "User Maintenance" by pressing:
07 HOLD 1
2. Enter: , press , enter: , and press
Start Time in Hours - 2 characters, and Minutes - 2
3. Enter:
characters
for the Special Day 1 mode and press
entry.
Note: To clear an entry or existing data, press the FL/R key.
Desired mode for Special Day: 0 - None, 1 - Day 1, 2
4. Enter:
- Day 2, 3 - Night, 4 Night 1, 5 - Night 2
the entry.
Note: To clear an entry or existing data, press the FL/R key
5. To set additional Special Day modes, press the
HOLD
or to move to the desired mode.
6. Repeat steps 3-5 until all Special Day modes are set. (Up to 20 Special Days
may be entered.).
Note: The entry positions are listed in Chapter 4 of Section 700 - Feature Operations.
MEMORY PROG
7. Press to return to "81-User Maintenance" (step 1).
OR...
MEMORY ON/OFF
Press to exit User Maintenance.
Message Key
To set the Message Key ID code using either a large-
display or small-display phone:
1. Enter "User Maintenance" by pressing:
06 HOLD HOLD
2. Enter: and press
Extension Number of the Phone Being
3. Dial the
Programmed HOLD
and press
40 ICX (International), issued June 2000
ON/OFF PROG * * CONF
HOLD HOLD
.
HOLD
to store the
HOLD
and press to store
VOLUME
up or down arrow
ON/OFF PROG * * CONF
.
.
ICX-45-750