Table of Contents
Advertisement
Taking Pictures Underwater
Taking Underwater Pictures (Underwater Mode/
Underwater Movie Mode)
This camera complies with JIS waterproof grade 8 and can be used to take
pictures at a depth of 12 m continuously for 2 hours. In addition, this camera
complies with JIS dustproof grade 6 (IP68).
Use the Underwater mode to take underwater still pictures that capture the
blueness of the sea.
Use the Underwater Movie mode to record movies underwater.
1
Use the four-way controller (2345) to select
(Underwater)/
Palette.
2
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
3
Press the shutter release button to take a picture.
If you selected
If you selected
recorded movie time reaches 25 minutes. To stop recording, press the shutter
release button fully. Perform the same steps as C (Movie) mode to record
movies.
Recording Movies 1p.113
• Before taking pictures underwater, make sure that there is no dirt or sand
on the waterproof seal of the battery/card and terminal covers and check
that the covers are securely locked.
• Before opening the battery/card and terminal covers after using the camera
underwater, make sure that there is no water, dirt, or sand on the covers or
anywhere else on the camera. Wipe the camera before opening the covers.
• When shooting in
or higher cards.
Regarding Waterproof, Dustproof, and Shockproof Design 1p.8
• When the Focus Mode is set to \, you can adjust the focus before
recording starts and during recording.
• Optical and digital zoom can be used in
Digital zoom can also be used during recording.
(Underwater Movie) from the Capture Mode
, the picture is taken.
, recording starts. You can continue recording until the
(Underwater Movie) mode, use SD Speed Class 4
mode before recording starts.
3
111
Advertisement
Table of Contents
