Setting Blink Detection
This specifies whether Blink Detection works when you use the Face Detection
function. The default setting is O (On).
1
Use the four-way controller (23) to select [Blink Detection]
on the [A Rec. Mode] menu.
2
Use the four-way controller (45) to switch between O (On) or
P (Off).
O(On)
3
P (Off)
The setting is saved.
Blink Detection 1p.63
If the Blink Detection function detected closed eyes when shooting, [Closed
eyes have been detected] is displayed for 3 seconds during Instant Review.
Setting the Instant Review
Use this setting to specify whether or not an Instant Review is displayed
immediately after images are shot. The default setting is O (On: displays the
image).
1
Use the four-way controller (23) to select [Instant Review]
on the [A Rec. Mode] menu.
2
Use the four-way controller (45) to switch between O (On)
or P (Off).
O(On)
P (Off)
The setting is saved.
Instant Review 1p.63
104
Blink Detection function works.
Blink Detection function does not work.
Instant Review is displayed.
Instant Review is not displayed.