Setting Blink Detection - Pentax OPTIO L60 Operating Manual

4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
The setting is saved.
6
3
Press the 3 button.
The camera returns to capture status.
• When Sensitivity is set to 3200 or 6400, the number of recorded pixels
is fixed at f.
• When set to 9 (Green) or C (Movie) mode, only Auto (sensitivity 64 - 800)
is available.
• When set to c (Digital SR (Blur Reduction)) mode, only Auto
(sensitivity 64 - 6400) is available.
• When set to S (Fireworks) mode, the sensitivity is fixed at its
minimum setting.
• If you change the [Sensitivity] setting frequently, you can save time by
assigning it to the Green button (p.108).
Saving the sensitivity setting 1p.115

Setting Blink Detection

This specifies whether Blink Detection works when you use the Face
Recognition function.
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [Blink
Detection].
102
Rec.Mode 1/3
10
Recorded Pixels
M
Quality Level
Auto
64
White Balance
100
Focusing Area
200
AE Metering
Sensitivity
400
MENU Cancel OK OK