Handset Settings - Panasonic KX-TCD440E Operating Instructions Manual

Useful Telephone Settings

Handset settings

Time alarm
An alarm will sound for 3 minutes at the set
time once or daily.
"ONCE": The alarm will ring only once.
"REPEAT DAILY": The alarm will ring at the
set time everyday.
"OFF": Turns this feature off.
Set the time and date beforehand (page 9).
Setting the time of alarm
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING HS", then press {>}.
3
Press {v} repeatedly to display "TIME
ALARM", then press {>}.
4
Press {v} repeatedly to display "SET
TIME", then press {>}.
5
Enter the desired hour and minute by
selecting 2 digits for each (24-hour time
entry).
L To erase a digit, press {C/T}.
6
Press {>}.
7
Press {v} repeatedly to select the
desired setting, then press {>}.
8
Press {ih}.
Note:
L To stop the alarm, press any dial key.
L When in talk or intercom mode, the alarm
will not sound until the call has ended.
L If you select "ONCE", the setting will be
changed to "OFF" after the alarm rings.
Changing the alarm frequency
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING HS", then press {>}.
3
Press {v} repeatedly to display "TIME
18
Helpline Tel. No. :U.K. 08700 100 076 R.O.I. 01289 8333
ALARM", then press {>}.
4
Press {v} repeatedly to display "SET
ALARM", then press {>}.
5
Press {v} repeatedly to select the
desired setting, then press {>}.
6
Press {ih}.
Ringer options
Ringer volume
7 levels (high to off) are available.
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING HS", then press {>}.
3
Press {v} repeatedly to display "RINGER
OPT", then press {>}.
4
Press {v} repeatedly to display "RINGER
VOL", then press {>}.
5
Press {e} or {v} repeatedly to select
the desired volume, then press {>}.
6
Press {ih}.
Note:
L When the ringer volume is set to off, the
following will be displayed.
Ringer types for external calls, internal
calls, paging or alarm
There are 20 ringer types (6 ringers and 14
melody ringers) available for each item.
"EXT RINGER": For external calls
"INT RINGER": For internal calls
"PAGING": For paging
"ALARM": For alarm
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING HS", then press {>}.
3
Press {v} repeatedly to display "RINGER
OPT", then press {>}.
4
Press {v} repeatedly to display the