I N S T A L L A T I O N
Connecting to a Stereo Audio System though XLR Balanced Cable
Rear Panel
You can also connect the BALANCED STEREO AUDIO OUT to your stereo audio system. Three-pin
(XLR3) cables are needed, and the XLR terminals on the player are male type.
NOTE
Balanced audio connectors are used mostly in professional audio electronics, such as high
quality microphones and inter-equipment connections. The BDP-105AU utilises the 3-pin XLR
connector (shown below), which transmits a pair of differential signals (positive /negative). The
amplifier extracts the voltage difference between differential signals, thus the common noise can be
rejected and the signal integrity is improved.
In some audio systems the position s of "hot" (positive) and "cold" (negative) pins are switched.
In this case please set " XLR Terminal Polarity " to " Inversion " in the Audio Processing of
Setup Menu.
Audio Interconnect Cable
R
L
AUDIO IN
Stereo or Surround Audio System
AUDIO/VIDEO
MUL TI-CHANNEL
RECEIVER
BDP-105AU
17