Safety Cut-Out Feature - Miele KM 5656 Operating Instructions Manual

Ceramic cooktop
Table of Contents

Advertisement

Safety features

Safety cut-out feature

The cooktop is on too long
The cooktop has a safety cut-out
feature in case it is not turned off after
use.
If a burner is turned on for an unusually
long period of time (see table), and the
power levels are not adjusted, the
cooktop will turn itself off automatically
and the residual heat indicator will light.
Power level
1
2
3
4
5
6
7
8
9
^ If you wish to use the burners once
again, turn the cooktop on as you
normally would.
22
Maximum
operating hours
10
5
5
4
3
2
2
2
1
Covered touch controls
The cooktop will turn off automatically if
any of the touch controls are covered
for more than 10 seconds, e.g. by
finger contact, food boiling over, or an
object such as an oven mitt or towel.
A tone will sound every 30 secs. for
max. 10 min. The display will show a
flashing F.
^ Clean the touch controls or remove
the object.
This will turn off the signal tone and the
displayed F will go out.
^ Turn the cooktop on again with the s
touch control. The burners can now
be used.

Advertisement

Table of Contents
loading

Table of Contents