Navigating The Menus; Changing From Text To Numbers - Cisco C Series User Manual

Navigating the Menus

Use the remote control to operate your TANDBERG video system. A few basic
navigation principles are all you need to know to get started.
 Press the home key to show the Home menu.
 The arrow keys in the centre of the upper part of the remote control are
used to navigate in the menus.
 When the system shows the Home menu only (see below), pressing home
key again will hide the menu. To bring it back, press the home key again.
 In an input field, pressing the C key will delete characters/numbers to the
left of the cursor position.
Press the home key to display the Home menu
The element
currently selected
is indicated by an
orange rectangle.
Use up and down
arrow keys to
navigate up and
down in a menu.
The little
triangle
indicates that a
submenu is
available.
7

Changing from Text to Numbers

Entry fields that expect a numeric entry will by default use the numbers from the
numeric pad. The default value for a field is shown on the right as either 123 for
a numeric field or abc for a text field. When entering values into a text field the
system works like the keypad on a mobile phone.
However, it is sometimes necessary to change between text and numbers, for
example when searching for a number in the phonebook or when entering a
dialling address of the form joe.bloggs@vc.scot.nhs.uk.
To change from text to
numeric values press the
corresponding softkey, as
displayed at the bottom of
the screen.
To enter a special character, press the
corresponding softkey and use the
arrows and tick button to select the
appropriate character.
8