Miele CVA 610 Operating Instructions Manual page 53

The descaling process will start automatically. The fol-
lowing will appear in the display window:
The descaling process will automatically stop if
the program selector is turned to "0ff" or if the
front of the appliance is opened. It will restart
when the front is closed or the program selector
turned to another position.
If a smaller container is used, it will need
to be emptied at intervals.
The pump will introduce a small quantity of descal-
ing agent into the system, then stop briefly to let the
solution take effect. The process will take 20 to 30
minutes, depending on the volume of water in the
water container.
When the program is finished, the following will ap-
pear in the display window:
Turn the steam selector clockwise to the
Press ENTER
The following will appear in the display window:
The machine must now be rinsed out to remove any
descaling agent residue.
Fill the water container three quarters of the way
with fresh, cold water and place it in the machine.
Place large empty containers under the hot water
and steam spouts and turn the steam selector
counterclockwise.
position.
o
53