Miele CVA 610 Operating Instructions Manual page 48

Remove the brew unit carefully.
When lubricating the brew unit make sure
it is properly positioned. For this the funnel
must be set a little higher and the socket
standing vertically (see the illustration, or the prob-
lem solving guide).
Smear a little silicone lubricant on the joints
c
the axle , in the tracks
e
ring .
Clean the bolt
lubricant on it and on the joints
Place the brew unit in the machine.
48
d
and on the sealing
b
and then smear a little silicone
b
,
c
.