Electrical Connection Aus, Nz - Miele H 4641 Operating Instructions Manual

Electrical connection AUS, NZ

All electrical work should be
undertaken by a competent person
in strict accordance with national
and local safety regulations.
The voltage and rated load are given
on the data plate, visible when the oven
door is open. Please ensure that these
match the household mains supply.
Please quote these data, and the model
and serial number when contacting the
Miele Service dept.
Connection of this appliance should be
made via a suitable isolator which
complies with national and local
regulations, and which is accessible
after the appliance has been built in.
WARNING
THIS APPLIANCE MUST BE
EARTHED.
Test marks . . . . . . . . . . Electrical safety
. . . . . . . . . . . . . . . . . . . . . . C-Tick Mark
Electrically suppressed
according to. . . . . . . . . . . AS/NZS 1044
74
AUS:
The wall oven is suitable for connection
to an a.c. single phase 240 V, 50 Hz
electricity supply.
The fuse rating is 16 A.
NZ:
The wall oven is suitable for connection
to an a.c. single phase 230 V, 50 Hz
electricity supply.
The fuse rating is 16 A.