Table of Contents
Advertisement
Multi-Picture Mode
≥If the [MULTI] Button is pressed while
self-recording Mirror Mode (
picture is displayed from the upper right corner
of the screen, but, in reality, the picture is
recorded from the upper left corner as usual.
≥Multi-Picture Mode cannot be used in digital still
picture mode.
≥The quality of Multi images deteriorates slightly.
≥The top and bottom of the Multi pictures will be
cut off slightly.
ª Playing Back
Repeat Playback
If you continue to press the [1] Button for
5 seconds or longer, the Movie Camera switches
to Repeat Playback Mode, and the [R !]
Indication appears. (To cancel Repeat Playback
Mode, set the [OFF/ON/MODE] Switch to [OFF].)
Choosing Sound during Playback
You can select the sound by using the
[AUDIO OUT] setting on the
[PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:
Stereo Sound (main sound and
sub sound)
L:
Left channel sound (main sound)
R:
Right channel sound (sub sound)
≥If you dub a tape recorded at the [12bit]
selected as the [AUDIO REC] on the
[RECORDING SETUP] Sub-Menu, playback
sound becomes stereo sound regardless of the
[AUDIO OUT] setting if [12bit AUDIO] is set to
[MIX].
ª Index Search Functions
≥Index Search may not be possible at the
beginning of tape.
≥Because Photoshot Index Signals are not
recorded on still pictures recorded in
Continuous Photoshot Mode, the Photoshot
Index Search Function cannot be used for these
still pictures.
≥Scene Index Search may not function properly if
the interval between 2 scene index signals is
shorter than 1 minute.
ª Playback Zoom Function
≥You cannot adjust the sound volume with the
Remote Controller in Playback Zoom Mode.
≥If you turn off the Movie Camera power or if you
switch from VCR Mode to Camera Mode,
Playback Zoom Mode is automatically
cancelled.
≥Even if Playback Zoom Functions are being
used, images that are output from the DV
Terminal (
) or Digital Still Picture Terminal
-6-
(
) are not enlarged.
-35-
Others
) is used, the still
-18-
-41-
≥ As you enlarge an image, the quality of image
suffers.
≥During a Playback Zoom, the Variable Speed
Search Function cannot be changed with the
Remote Controller.
ª Playback Digital Effect Functions
≥Signals of images to which digital effects are
added during playback cannot be output from
the DV Terminal (
-6-
Terminal (
).
-35-
≥You cannot use the Wipe or Mix Function while
playing back the non-recorded portion of tape.
Multi-Picture Mode (VCR Mode)
≥The quality of Multi images deteriorates slightly.
≥Playback Multi-Mode screens cannot be output
through the DV Terminal (
Picture Terminal (
-35-
≥If there is input from DV Terminal, a multi
screen cannot be created. (NV-GS30 only)
≥If you switch the Movie Camera from the Index
Multi-Picture Mode over to the Camera Mode,
the setting of [SCAN MODE] on the
[MULTI-PICTURES] Sub-Menu of the
[CAMERA FUNCTIONS] Main-Menu is
automatically set to [STROBE].
ª Playing Back on Your TV
≥Picture size may be displayed differently when
playing back a Cinema picture on a wide-screen
TV with [B/W] or [SEPIA] of Playback Digital
Effect.
ª Audio Dubbing
≥The blank section of a tape cannot be dubbed.
≥Sounds sent through the DV Terminal cannot
be dubbed.
≥If a tape has a non-recorded portion when the
tape is dubbed, images and sounds may be
disturbed when this portion of the tape is played
back.
≥If you set the tape counter back to 0 at the
position where you want to stop Audio Dubbing
so as to make it possible to use the Memory
Stop Function (
), Audio Dubbing is
-47-
terminated automatically when the tape reaches
this position.
≥In the case of importing data recorded with
Audio Dubbing to a PC using the PC's software
programme, only the original sound (ST1) may
be imported, depending on the software
programme.
) or Digital Still Picture
) or Digital Still
-6-
).
Hide quick links:
Advertisement
Table of Contents
