Panasonic NV-GS10 Operating Instructions Manual page 26

To Select a Desired Digital Effect
Set [CAMERA FUNCTIONS] >>
[DIGITAL EFFECT] >> [EFFECT1] or [EFFECT2]
>> a desired Digital Effect.
To Cancel the Digital Effect
Set [CAMERA FUNCTIONS] >>
[DIGITAL EFFECT] >> [EFFECT1] or [EFFECT2]
>> [OFF].
≥If the Movie Camera is turned off, the
[EFFECT2] settings are cancelled.
≥For other notes concerning this item, see
ª Wipe Mode and Mix Mode
Wipe Mode:
Like a curtain is being pulled, the still picture of
the last recorded scene gradually changes to the
moving image of a new scene.
WIPE
WIPE
Mix Mode:
While the moving image of a new scene fades in,
the still image of the last recorded scene
gradually fades out.
MIX
MIX
1
Set [CAMERA FUNCTIONS] >>
[DIGITAL EFFECT] >> [EFFECT1] >> [WIPE]
or [MIX].
(40) (32)
WB/SHUTTER/IRIS/
MF/VOL/JOG
≥The [WIPE] or [MIX] Indication appears.
2
Press the Recording Start/Stop Button
to start recording.
(38)
Camera Mode
.
-40-
WIPE
MIX
PUSH
(38)
3
Press the Recording Start/Stop Button
to pause the recording.
≥The last scene is stored in memory. The
[WIPE] or [MIX] Indication changes to [B]
or [C].
4
Press the Recording Start/Stop Button
to restart the recording.
≥The last image of the previous scene
gradually changes to the new scene.
≥For other notes concerning this item, see
ª Picture-in-Picture Mode
You can display a sub-screen (still picture) inside
the screen.
1
Set [CAMERA FUNCTIONS] >>
[DIGITAL EFFECT] >> [EFFECT1] >>
[P-IN-P].
(40)
2
Set [CAMERA FUNCTIONS] >>
[MULTI-PICTURES] >> [P-IN-P] >> a position
(1, 2, 3, 4) where you want to insert a
small still picture.
3
Aim the Movie Camera at the scene you
want to capture and press the [P-IN-P]
(9)
Button to insert a small still picture.
(9)
MULTI/
P-IN-P
≥A small still picture is displayed in a normal
picture.
≥If the [P-IN-P] Button is pressed again, the
small still picture is cleared.
-26-
(32)
WB/SHUTTER/IRIS/
PUSH
MF/VOL/JOG
1 2
3 4
(38)
(38)
.
-40-