Before Using For The First Time; Calibration Of The Baking Sensor - Miele H 4681 BP KAT Operating Instructions Manual

Before using for the first time

The oven will switch on automatically
when it is connected to the electricity
supply.
A welcome screen will appear in the
display and you will then be requested
to select some basic settings which are
needed to set up the appliance up for
using for the first time.
Follow the instructions in the display.
The welcome screen will be replaced
by the Language request menu.
^ Keep pressing the sensor to the right
of the arrows until the language you
want appears in the display.
^ Touch the sensor on the left hand
side of the language you want.
A tick L will appear beside the
language you have selected.
^ Touch the sensor next to "Continue" to
confirm your selection.
The request to select a Clock format
will appear.
^ Select the clock format you want
(12 hour or 24 hour) and confirm this
with "Continue".
You will then be requested to enter the
Time of day.
You can either use the sensors next to +
and - or the numerical keypad to enter
the time.
^ First enter the hour and confirm with
"Continue". Then enter the minutes
and confirm with "Continue".
If you are using the keypad to enter
the time you can enter the minutes
immediately after entering the hour.
18
You will then be asked if you want the
display to Always show the time or for
the time of day to be displayed only
when the oven is in use.
^ Select the option you want.
After you have confirmed your selection
with "Continue", the display will show
messages to tell you that:
– your appliance is set up ready to
take the Miele|home system.
– setting up for using for the first time
has been successfully completed.
Your oven is ready for use as soon as
you confirm the last message with "OK".
Calibration of the baking
sensor
The built-in baking sensor will start to
calibrate after the setting up process
has been completed. If you try to
operate the oven during the calibration
process, a message telling you that the
baking sensor is being calibrated will
appear in the display.
The process will take about five
minutes.
During this time the sensor
electronically measures conditions in
the oven and sets itself accordingly.
This measurement is repeated at
regular intervals to ensure that
conditions in the oven are monitored
continually.