Setting The Date And Time - Panasonic KX-TCD320E Operating Instructions Manual

TCD320E(e).book Page 14 Friday, January 7, 2005 10:01 AM
Preparation

Setting the date and time

Important:
L Confirm that the AC adaptor is connected.
L Ensure that w is not flashing. If the
handset is in screen saver mode, w is not
displayed. Press {ih} to turn the
display on.
1
Press $ (middle soft key).
2
Select Y, then press ,.
3
Select "Time Settings", then press
,.
4
Select "Set Date & Time", then press
,.
5
Enter the current day, month and year by
selecting 2 digits for each.
Example: 17 May, 2005
Press {1}{7} {0}{5} {0}{5}.
6
Enter the current hour and minute by
selecting 2 digits for each.
L You can select "AM", "PM" or 24-hour
time entry by pressing {*} repeatedly.
Example: 3:30 PM
Press {0}{3} {3}{0}, then press {*}
repeatedly until "03:30 PM" is
displayed.
7
Press ,.
8
Press {ih}.
Note:
L To correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
L The date and time may be incorrect after a
power failure. In this case, set the date
and time again.
14 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333