Formatting
The unit's memory can be initialized (formatted) by the unit itself. Doing
so will erase all the data recorded on it.
Initiate the formatting while the battery indicator shows a full charge.
Preparation: 1. Release the HOLD switch. (
1
Select "SET". (
or
Press
2
Select "SYSTEM".
or
Press
3
Select "FORMAT".
or
Press
4
Select "YES".
or
Press
5
Select "YES".
or
Press
Note
• Do not use your computer to format the unit's memory.
• Do not remove the battery during formatting. Doing so may cause the unit to
malfunction.
• If the remaining battery charge becomes depleted or the battery is removed
before formatting is completed, initiate the reset procedure. (
36
2. Turn the unit on. (
page 30, Setting various items)
page 14)
page 15)
Press
Press
Press
Press
Press
page 38)