Line In Recording - Panasonic SV-MP805V Operating Instructions Manual

LINE IN recording

Preparation:
3. Connect the recording device to the unit.
Connect the LINE OUT connector or earphone jack of the recording
source device to the unit's USB connector using the USB cable supplied.
When connecting with the earphone jack, adjust the volume of the
recording source device before connecting.
AUTO SYNC. mode
In this mode, files are created and recorded for each track played by
the recording source device. If the unit is already switched to LINE IN
mode, the LINE IN standby screen shown in step 1 will be displayed.
1
Select "LINE IN". (
or
Press
2
Set to the recording standby mode.
• Press again to release the recording standby mode.
• The standby screen in step 1 appears when the recording standby
mode remains established for 10 or more minutes.
Recording starts when the
3
recording source device is played.
4
Complete the recording when the recording source device stops.
The recording standby mode is established after the recording source device
play is completed. When
28
Turn the unit on
2
3
1
USB cable (included)
Press
is pressed, the recording standby mode is exited.
page 15, Selecting modes)
Press
Press
3
(M3 jack)
/ LINE OUT
Standby screen
RECORD MODE
( page 33, LINE IN)