Table of Contents
Advertisement
1. Introduction and Installation
1.8 Recording paper
1.8.1 Using the paper input tray
A4 or letter size recording paper can be used.
The paper input tray unit can hold:
– Up to 250 sheets of 60 g/m
paper.
– Up to 230 sheets of 80 g/m
– Up to 200 sheets of 90 g/m
L Please refer to page 97 for information on
recording paper.
L The unit is set for A4 size paper by default.
If you want to use letter or legal size
paper, change the setting:
– by using {PAPER TRAY} in the copy
mode (page 47).
– in feature #380 (page 65).
1
Pull open the paper input tray (1).
1
2
Pinch the right side of the recording paper
guide (1), then slide it to match the paper
size mark.
Pinch the front side of the recording paper
guide (2), then slide it open to its full width.
2
18
2
2
to 75 g/m
2
paper.
2
paper.
1
3
Before loading a stack of paper, fan the
paper to prevent paper jams.
4
Load the paper, print-side up (1).
Important:
L Push and lock the plate (2) in the
paper input tray, if it is lifted.
1
2
5
Adjust the width to the size of the recording
paper by sliding the front side of the guide
(1).
L Make sure that the recording paper is
under the paper limit mark (2), and the
paper should not be over the snubbers
(3).
2
1
3
3
Advertisement
Table of Contents
