Table of Contents
Advertisement
2. Preparation
2.6 Adjusting volume
Before adjusting volume, set the operation mode
to the fax mode (page 32) or the copy mode
(page 46).
{SET}
Ringer volume
While the unit is idle, press {V} or {^}.
L If any documents are in the document
entrance, you cannot adjust the volume.
Confirm that there are no documents in the
entrance.
To turn the ringer OFF
1. Press {V} repeatedly to display "RINGER
OFF= OK?".
2. Press {SET}.
L When a call is received, the unit will not
ring and will display "INCOMING CALL".
L To turn the ringer back ON, press {^}.
Ringer pattern
L You can select one of three ringer patterns
(feature #161 on page 64).
Monitor volume
While using the monitor, press {V} or {^}.
Initial Programming
26
{V}{^}
2.7 Date and time
You must set the date and time.
{FAX}
{SET}
1
Press {MENU}.
2
Press {#}, then {1}{0}{1}.
3
Press {SET}.
L The cursor (|) will appear on the display.
4
Enter the current date/month/year by
selecting 2 digits for each.
Example: 10 August, 2006
Press {1}{0} {0}{8} {0}{6}.
5
Enter the current hour/minute by selecting 2
digits for each. Press {*} to select "AM" or
"PM".
Example: 3:15PM (12 hour clock entry)
1. Press {0}{3} {1}{5}.
2. Press {*} repeatedly to display "PM".
6
Press {SET}.
7
Press {MENU} to exit.
Note:
L If you select Czech, Slovak or Hungarian for
the language (feature #110 on page 64), the
time is set using a 24 hour clock.
{MENU}
{<}{>}
SYSTEM SETUP
PRESS [( )]
SET DATE & TIME
PRESS SET
D:|
0 1/M:01/Y:06
TIME: 12:00AM
D:10/M:08/Y:06
TIME:
1 2:00AM
|
D:|
1 0/M:08/Y:06
TIME: 03:15AM
D:|
1 0/M:08/Y:06
TIME: 03:15PM
SETUP ITEM [
]
Advertisement
Table of Contents
