Table of Contents
Advertisement
L To cancel erasing, press {STOP}, then
{MENU}.
4
Press {SET}.
5
Press {STOP} to exit.
5.2.3 Erasing specific caller
information
1
Press {CALLER ID}.
2
Press {V} or {^} repeatedly to display the
desired item.
3
Press {<}.
L To cancel erasing, press {STOP}.
4
Press {SET}.
L To erase other items, repeat steps 2 to 4.
5
Press {STOP} to exit.
5.3 Storing caller
information into the one-
touch dial feature and
navigator directory
L Keep the front cover page open for button
locations.
Important:
L This feature is not available in the
following cases.
– The telephone number includes data
other than numbers (i.e., * or #).
– The caller information does not
include a telephone number.
1
Press {CALLER ID}.
2
Press {V} or {^} repeatedly to display the
desired item.
3
Press {MENU}.
4
Select the station key or navigator directory.
For stations 1–3:
1. Press the desired station key.
2. Press {SET}.
3. Press {SET}.
For stations 4–9:
1. Press the desired station key.
2. Press {SET}.
For stations 10–18:
1. Press {LOWER}, then press the desired
station key.
2. Press {SET}.
For navigator directory:
1. Press {<} or {>}.
2. Press {SET}.
5
Press {SET}.
Note:
L You can confirm the stored items by printing
the telephone number list (page 95).
L The unit can only store a name of up to 16
characters long.
L To edit a name or number, see page 31.
L If caller information does not include the
caller's name, enter the name manually. See
the instructions on page 30.
L If you assign an item to a station key which
already contains an item, the previous item
will be replaced.
L If you use stations 1–3 as broadcast keys,
you cannot store caller information for
stations 1–3 (page 36).
5. Caller ID
45
Advertisement
Table of Contents
