Table of Contents
Advertisement
Connect the speaker cables.
Insert the wire fully, taking
care not to insert beyond
the wire insulation.
i: White
j: Blue line
This unit (rear)
Subwoofer
PUSH !
[Note]
Be careful not to cross (short circuit) or reverse the
polarity of the speaker wires as doing so may
damage the speakers.
2
Radio antenna connections
Using an indoor antenna
Adhesive
tape
FM ANT
(75 )
This unit (rear)
Using an outdoor antenna
Use outdoor antenna if radio reception is poor.
≥Disconnect the antenna when the unit is not in use.
≥Do not use the outdoor antenna during an
electrical storm.
Use the antenna
plug adaptor
(supplied)
FM ANT
75 ≠ coaxial
(75 )
cable
This unit (rear)
(not supplied)
3
1
2
White
Blue
line
White
Surround
Blue
speaker (L)
line
FM indoor antenna
(supplied)
Affix this end of the
antenna where
reception is best.
FM outdoor
antenna (Using
a TV antenna
(not supplied))
The antenna
should be
installed by a
competent
technician.
3
Audio and video connections
Basic setup example
SCART cable
(not supplied)
This unit
(rear)
This connection will also enable you to play TV
§
audio through your home theater system (
Selecting the source by the remote control).
Select the appropriate audio out (e.g. Monitor)
on the TV.
≥When both the HDMI cable and SCART cable are
connected, there will be no RGB output from the
SCART (AV) terminal.
Other video connection
[\\\\\\\\\\\HDMI\AV\OUT\\\\\\\\\]
This connection provides the best picture quality.
Connect the HDMI cable (not supplied) from
the HDMI AV OUT terminal on this unit to the
HDMI AV IN terminal on your TV.
≥If your TV is not ARC compatible, make the extra
audio connection.
≥Set "VIDEO PRIORITY" to "ON" (
≥Set "VIDEO FORMAT" in Menu 4 (HDMI) (
VIERA Link "HDAVI Control"
If your Panasonic TV is VIERA Link compatible, you can
operate your TV synchronising with home theater
operations or vice versa (
"HDAVI Control
TM
ARC (Audio Return Channel)
If the TV is ARC compatible, audio from the TV can be
sent to this unit via the HDMI cable without the need to
make an extra audio connection. For details, refer to the
operating instructions for your TV.
≥Be sure to connect to the TV's ARC compatible
terminal.
≥After connecting with the HDMI cable, make settings to
suit the type of audio from your digital equipment
(
10).
≥Only Dolby Digital and PCM can be played with this
connection.
[Note]
≥Please use High Speed HDMI Cables that have the
HDMI logo (as shown on the cover).
≥Non-HDMI-compliant cables cannot be utilised.
≥It is recommended that you use Panasonic's HDMI
cable. Recommended part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
≥For TV with more than one HDMI terminal, refer to the
operating instructions for the TV to determine which
terminal to connect to.
Do not make the video connections through the
VCR.
Due to copy guard protection, the picture may not be
displayed properly.
§
TV
AV1
AV
19, HDMI menu).
16, Using the VIERA Link
").
10,
15).
7
Hide quick links:
Advertisement
Table of Contents
