Easy Control Only With Viera Remote Control (For "Hdavi Control 2 Or Later"); Playing From Music Port; Changing The Player Settings - Panasonic SC-PT90 Operating Instructions Manual

Speaker Selection
You can select whether audio is output from this unit's
speakers or the TV speakers by using the TV menu
settings. For details, refer to the operating instructions for
your TV.
Home Cinema
This unit's speakers are active.
≥When you turn on this unit, this unit's speakers will be
automatically activated.
≥When this unit is in standby mode, changing the TV
speakers to this unit's speakers in the TV menu will
automatically turn this unit on and select "AV"
"AUX" or "ARC" as the source.
§1 §1
≥The TV speakers are automatically muted.
≥You can control the volume setting using the volume or
mute button on the TV's remote control. (The volume
level is displayed on this unit's display.)
≥To cancel muting, you can also use this unit's remote
control ( 5).
≥If you turn off this unit, TV speakers will be
automatically activated.
TV
TV speakers are active.
≥The volume of this unit is set to "0".
–This function works only when "DVD/CD", "AV"
"AUX" or "ARC" is selected as the source on this
§1 §1
unit.
≥Audio output is 2-channel audio.
When switching between this unit speakers and TV
speakers, the TV screen may be blank for several
seconds.
Easy control only with VIERA remote control (for
"HDAVI Control 2 or later")
You can control the playback menus of this unit with the
TV's remote control.
1 Select this unit's operation menu by using the TV menu
settings.
(For details, refer to the operating instructions for your
TV.)
The START menu will be shown.
e.g. [DVD-V]
DVD/CD Home Cinema
P la y b a ck D is c
TOP MENU (DVD)
MENU (DVD)
Input Selection
Sound
≥The START menu can also be shown by using a
button on the TV's remote control (e.g. [OPTION]).
–When "DVD/CD" is selected as the source, the TV's
remote control works only during stop mode.
2 Select the desired item on the START menu (
When the on-screen control panel appears
e.g. [DVD-V] (when "Playback Disc" is selected from the
START menu.)
You can operate the playback with the indicated controls.
≥The on-screen control panel can also be shown by
using a button on the TV's remote control (e.g.
[OPTION]).
–This works only during "DVD/CD" playback and
resume modes.
,
§1
,
§1
Playback/menu access
10).
[Note]
≥Depending on the menu, some button operations
cannot be performed from the TV's remote control.
≥You cannot input numbers with the numbered buttons
on the TV's remote control ([0] to [9]). Use this unit's
remote control to select the play list etc.

Playing from MUSIC PORT

The MUSIC PORT allows you to connect and enjoy
music from an external music device (e.g. MP3 player)
through your home theater system.
Preparation
≥To avoid distorted sound, make sure that any equaliser
function of your external device is turned off.
≥Reduce the volume of this unit and external music
device.
1
Connect the external music device (not supplied)
to the MUSIC PORT.
Plug type: ‰3.5 mm stereo mini plug
2
Press [EXT-IN] to select "MUSIC P.".
Adjust the volume on the external music device to a
normal listening level, and then adjust the volume of this
unit.

Changing the player settings

1
Press [DVD] to select "DVD/CD".
2
Press [SETUP] to show the setup menu.
Menu
MAIN
DISC
VIDEO
AUDIO
DISPLAY
HDMI
OTHERS
SET
RETURN
3
Press [3, 4] to select the menu and press [OK].
Display the current setting
of the items below
DISC
CURRENT SETTINGS
AUDIO
SUBTITLE
MENUS
RATINGS
PASSWORD
SET
RETURN
Item
4
Press [3, 4] to select the item and press [OK].
5
Press [3, 4] to make the settings and press
[OK].
6
Press [SETUP] to exit.
≥To return to the previous screen, press [RETURN].
≥The settings remain intact even if you switch the unit to
standby.
≥Boxed items are the factory settings in the following
menus.
EXIT : SETUP
ENGLISH
AUTO
ENGLISH
8 NO LIMIT
EXIT : SETUP
Setting
17