Panasonic EP3205R2 Instruction Manual page 9

WHEN YOU WANT MORE CONTROL OVER INDIVIDUAL MASSAGE SETTINGS. (USER ADJUSTMENT FUNCTIONS)
Using the User Memory Buttons allow you to customize the back massage.
The more you use these functions the more you'll customize it to provide just what it is you like.
Programmed Operation and
1
Self Program buttons
3
User Memory Buttons
When you Want More Control over Individual Massage Settings
1. Select and start the program (Programmed Operation and Self Program) you desire
by following the procedures shown on Pages 44–51.
2. After the massage starts, adjust the program to your individual needs.
Spend more time on the location and type of massage you like with the focus button.
• During the program when the massage feels particularly good, press
that particular massage action.
Press to increase
• will flash and the unit will increase the amount of time spent on that particular type of massage.
the time spent on • That particular kind of massage action will be repeated once more.
• The location and the type of massage will be recorded and the program will be changed to
a particular location
emphasize this area and type of massage during the overall program.
and type of massage.
• The focus function cannot be used in the Self Program.
• The focus function cannot be used when
Fine Tuning Massage Location.
• Press this button to make minor adjustments to the location and lateral movement of the
massage heads during a program.
• will start flashing.
Press to fine tune • The massage heads will move in accordance with the buttons you press.
the massage location. • The location to which you have moved the massage heads will be recorded and the program
will be changed to move to this location whenever the program is selected.
• If you press the button and hear "beep-beep-beep", this means that the massage heads
cannot be moved in the direction you have selected.
3. Recording the adjustments you have made.
(1) After the program has finished, or when you have pressed
back to the retracted position will start flashing after 20 seconds.
(2) Select and press the User Memory Button you want to record this program in. (Press one of the
buttons while are flashing. They will flash for approximately 15 seconds.)
(3) The button you selected and pressed will then continue to flash,
will be completed.
Recording over existing programs.
• If you try and record over an existing program then the button you have pressed will flash quickly.
• Press the same button again to erase the existing information and record the new information.
• If you do not want to erase the information, select and press another of the User Memory Buttons.
• If you decide that you do not want to record the information, press
buttons to cancel.
• While the information is being saved, none of the other buttons apart from the reclining and legrest button can be used.
52
Massage Position
2
Adjustment button
2
Focus button
to concentrate on
, or are displayed.
, after the massage heads have moved
will flash and then the massage
without pressing any of the User Program
When you Want More Control over Individual Massage Settings
1. Press .
2. Select and press the User Memory Button you require.
(You can actually press one of the User Program buttons without pressing
3. Select and press the program you desire.
The specific treatment areas you recorded are displayed.
• The massage lounger will carry out body searching to check whether or not someone with the same physical
characteristics is using the unit. (Nothing will be displayed and no sounds will be emitted during this period.)
If the physical characteristics are the same as those recorded the previous time then the massage will start immediately. If,
however, the physical characteristics are determined to be different then body searching will be carried out in the normal
way before the massage begins.
Creating a Customized Program
After following the procedures outlined on this page and the previous page, after the program has
finished and while the button is still flashing press the same User Memory Button. You must press A or
B or C to record any changes made.
Erasing Recorded Data
• It is possible to restore the factory default settings.
(It is not possible to return to the previously recorded User Program setting.)
(1) Press .
(2) Select and press the button with the information you want to erase.
• The button will stop flashing and the Programmed Operation buttons will start flashing.
(3) Hold the same button down (for at least 3 seconds) until
• The button selected will start to flash (for approximately 15 seconds).
(4) Press the same button again while it is flashing.
• The data recorded will be erased and the button will stop flashing.
.)
(i.e., shiatsu, deep, gentle, refresh, Self Prog.)
, , and stop flashing.
53