Panasonic EP3205R2 Instruction Manual page 5

Massage lounger
Table of Contents

Advertisement

USING THE MASSAGE LOUNGER
WHEN YOU WANT TO USE THE MASSAGE LOUNGER RIGHT AWAY. (PROGRAMMED OPERATION)
Display of Massage Areas
• Shows the massage areas currently
being massaged by flashing.
Movement Display
• This displays the program
that is currently in use.
Pressure Level Display
• This displays the amount of
pressure exerted on the body.
1
2
Neck Roller Position
Button
• Pressing this button allows
you to adjust the shoulder
position after body searching
has been carried out.
1. Press
.
• The Programmed Operation buttons (four) and the Self Program buttons will start to flash.
• The massage heads will not start to move until you press one of the program buttons.
2. Select the program you want.
• Please press one of the flashing buttons.
• See Page 46 for details regarding the content of each of these Programmed Operation.
• It is possible to change programs during the massage by pressing one of the other program buttons.
• This program uses mainly Shiatsu massage
to provide a strong massage that is ideal for
people who have extremely stiff shoulders, etc.
• This program uses kneading massage to
thoroughly relax stiff muscles in many areas.
Still a strong massage.
3. Sit as far back in the seat as possible with your head
on the pillow (back cushion/backrest).
Press the program button you desire to start the massage. The seat will
automatically recline to the massage position and body searching will
commence.
• You will feel a light tapping sensation on your shoulders. Always check the
shoulder position and when necessary adjust it manually with the neck roller
position button.
• Body searching can be carried out for people with a height of 140 cm to 185 cm.
After body searching has been completed the massage will commence.
• The air massage on the legs/calf will commence at the same time that body
searching commences.
• You can freely adjust the angle of the backrest and legrest.
• Slide the legrest to adjust the position of your knees and calves. (See Page 47)
44
Program Strength Display
• This displays the strength of
the selected program.
Program Strength Button
• Use these buttons to adjust
the strength of the back
massage or calf/foot
massage.
• This program uses a gentle massage to help
soothe a tired body with a gentler, longer
Swedish style massage strokes.
• This is a more general program using a variety
of massage movements to help refresh people
when they're feeling tired. Mixes both Shiatsu
and Swedish.
Correct Massage Position
Reclined approximately 11°.
Raised approximately 50°.
• If the massage lounger is reclined further than
this angle then it will not automatically recline.
4. After the Massage has been Completed the Unit will Automatically Stop.
After the designated program has been completed the massage lounger will automatically stop.
(Approximately 15 minutes.)
Stopping the Massage during a Program
• Press
again.
• The legrest will automatically be lowered and the massage heads will return to the retracted position.
After the massage heads have stopped moving the backrest will return to the original position.
Stopping the Massage Immediately
• Press
if you want to stop the massage immediately.
• All movement will immediately stop.
• Please press
twice in order to return the massage heads to the retracted position.
Adjusting the Strength of the Back Massage
Please press
to adjust massage strength.
Adjusting the Strength of the Leg/Calf Massage
Please press
to adjust massage strength.
Turning off Vibration
Please press
to stop the vibration in the desired area. Press it again to restart it.
Body Searching — Adjusting Shoulder Position
The massage rollers will rise up the back until
they reach the area behind the neck, after
which they will descend to the level of the
shoulders where soft tapping will be carried
out for approximately 10 seconds.
Soft Tapping
• When there is nobody sitting in the seat or when body searching has not been carried out successfully, "massage
terminated" will be announced and the soft tapping will stop. If this happens then please sit as far back as possible with
your head on the pillow (back cushion/backrest) and push
• When someone else wishes to use the massage lounger midway through a massage, please push
massage and start from the beginning again as the shoulder position will vary from person to person.
3-Stage
Adjustment
* When the strength is set to 0 (i.e. no bars are lit on the display)
the leg/calf air massage will stop and change to the back
massage only.
Use the Neck Roller Position Adjustment button
to properly set the shoulder position while soft
tapping is being carried out.
Up
Down
Too High
Correct Position
Pressing one of the buttons
once will raise or lower the
Too Low
massage heads by approxi-
mately 1.8 cm.
to carry out body searching again.
to stop the
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ep3205

Table of Contents