Panasonic EP3205R2 Instruction Manual page 8

Changing the Degree of Fatigue During the Program
• After pressing the button corresponding to the area you want to change and making any changes, press
• You can change the program even during mid-program by following the procedures on Pages 48 and 49.
(1) Press location to select (2) Press fatigue
the area you want to change. the degree of fatigue.
Additional Information
The massage will be carried out in descending order from the greatest degree of fatigue.
• If the degree of fatigue selected is the same, the massage will be carried out in the
following order. Neck -> Shoulders -> Back -> Lower Back.
• If the degree of fatigue selected for any particular area is
will be carried out in that area and the massage heads may merely pass over that
area on the way to the next selected area.
• If the degree of fatigue selected for the Neck to the Lower Back is
body massage will be carried out.
• If the degree of fatigue selected for the Legs is
out.
Degree of Fatigue Settings are NOT Massage Strength Settings
• The movement and duration of the massage is determined by the unit based on the degree of fatigue selected.
• Use the Strength buttons to adjust the strength of the massage.
• Please note that in the Self Program massage strength for the legs cannot be set to 0.
• The focus button cannot be used in Self Program mode.
50
to input (3) Press after you have
finished making the desired
changes.
— 3rd
, then no massage
— 1st
— No Massage
, no upper
— 2nd
, no air massage will be carried
— Constantly
Massaged
Additional Information
.
Details regarding Self Program
• A simple explanation of the movements is provided below.
Stiff Neck/Fatigue
Stiff Shoulders/
Fatigue
Back Muscle
Fatigue
Lower Back
Fatigue
Legs/Soles/Seat
Degree of
Fatigue
After using Knead B to relax the area surrounding the neck, Knead C and Tap A are used to
massage areas of more severe stiffness.
After using Knead B to relax the area surrounding the neck, Tap A and Knead B are used to
relax the muscles.
After using Knead B to relax the area surrounding the neck, Tap B and Knead C are mainly
used to finish off with.
Tap B and Knead B are used to relax the area surrounding the neck.
Tap B is mainly used to relax the area surrounding the neck.
Degree of
Fatigue
After using Shoulder grasp, Tap A and Shiatsu A to relax the shoulders, a kneading
massage is used along the shoulder blades.
After using mainly Shoulder grasp and Shiatsu A to relax the shoulders, Knead C and
Knead A are used on the area surrounding the shoulders.
After using mainly Tap B and Tap A to relax the shoulders, Shiatsu A and Knead B are used
to finish off the area surrounding the shoulders.
Mainly kneading and Tap B are used to thoroughly relax the area surrounding the shoulders.
Mainly Tap B is used to gently relax the area surrounding the shoulders.
Degree of
Fatigue
After using Knead B to relax the back muscles, Shiatsu B is then used to stretch the back
muscles after which Knead A, Knead B and Knead C are used to relax the back muscles.
After using Knead B to relax the back muscles, Shiatsu B is then used to stretch the back
muscles after which Knead A and Knead B are used to relax the back muscles.
Knead B and Knead A are used along the back muscles to relax them.
After using Tap B to relax the back muscles, Knead B and Knead A are used to relax them.
Mainly Tap B and Swedish are used to thoroughly relax the back muscles.
Degree of
Fatigue
Knead B, Shiatsu B and Tap A are used to thoroughly relax the lower back muscles.
Knead B, Shiatsu B and Knead A are used to thoroughly relax the lower back muscles.
In addition to Knead B and Swedish, Tap C is used to relax the lower back muscles.
After using Tap B, Knead B and Tap B are used to relax the muscles.
Mainly Tap B and Swedish are used to thoroughly relax the muscles.
Degree of
Fatigue
The selected area is repeatedly grasped and then squeezed. (See Page 59 for explanation
of "grasp" and "squeeze" massage.)
After the selected area has been repeatedly grasped it is then repeatedly squeezed.
After the selected area has been relaxed using grasping and squeezing it is then finished off
with a rubbing movement.
After the selected area has been slightly relaxed using grasping and squeezing a rubbing
movement is used.
A rubbing movement is used to gently relax the selected area.
51