[Economy]; [Auto Review] - Panasonic Lumix DMC-TZ37 Operating Instructions Manual

Basics
• For the setting procedures of the menu.

[Economy]

Turn off the camera or make the LCD monitor go dark while not using the camera to
minimise battery consumption.
[Auto Power Off]
Automatically shut off the camera while not in use.
■
Settings: [2MIN.] / [5MIN.] / [10MIN.] / [OFF]
●
To restore → Turn on the camera again.
●
Cannot be used in the following cases:
When connected to AC adaptor (supplied), when connected to computer/printer,
during motion picture recording/playback, during Slide Shows
●
Settings fixed to [5MIN.] in [Intelligent Auto] Mode.
[Monitor Power Save]
The LCD monitor goes dark to minimise power consumption.
■
Settings: [ON] / [OFF]
●
Reduces the picture quality of the LCD monitor display during recording to minimise
battery consumption (except for the Digital Zoom area). Note, however, that there is
no effect on the recorded picture.
●
The setting in [Monitor Luminance] is prioritised over the setting in [Monitor Power
Save] for the brightness of the LCD monitor.

[Auto Review]

Automatically display still pictures immediately after taking them.
■
Settings
[1SEC] / [2SEC]: The playback screen is displayed for the set time, then automatically
[HOLD]: Auto review screen remains until a button (other than the [DISP.] button) is
pressed
[OFF]
●
Automatically displays still pictures immediately after they are taken during [Auto
Bracket] and burst recording, regardless of the [Auto Review] setting.
●
For [Intelligent Auto] Mode, the setting is fixed to [2SEC].
●
Motion pictures cannot be automatically reviewed. (also applies to high-speed motion
pictures)
returns to the recording screen.
(→54)
- 62 -
Using the [Setup] menu
VQT4T12