Panasonic Lumix DMC-TZ37 Operating Instructions Manual page 244

Wi-Fi
Use cursor button to select [New account], and press
[MENU/SET]
• Connect to the network. Proceed to the next page by pressing [MENU/SET].
• A confirmation screen will be displayed if a login ID has already been acquired for
the camera. Select [Yes] to acquire a new login ID, or [No] if you do not need to
acquire a new login ID.
Select the method for connecting to a wireless access point,
and set
• For details (→205).
• The settings screen will only appear during the first connection. Connection
methods set on this unit are stored and will be used for subsequent connections.
If you want to change the wireless access point to connect to, press the [DISP.]
button, then change the connecting destination.
Press [MENU/SET]
Read through the "LUMIX CLUB" terms of use and press
[MENU/SET]
• You can press
• You can enlarge (2x) the display by moving the zoom lever toward T.
• You can reset the enlarged display to its original size (1x) by moving the zoom
lever toward W.
• You can move the position of the enlarged display with cursor button.
• Press [
Enter a password and press [MENU/SET]
• Enter any combination of 8 to 16 characters and numbers for the password.
• For details on how to enter characters, refer to "Entering Text" (→114).
Check the login ID and press [MENU/SET]
• The login ID (12-digit number) will be displayed automatically. When logging in to
the "LUMIX CLUB" with a computer, you only need to enter the numbers.
• A message is displayed when the connection is complete. Press [MENU/SET].
• Be sure to make a note of the login ID and password.
• Close the menu after changing settings.
to switch pages.
] button to cancel the process without acquiring a login ID.
- 244 -
Using "LUMIX CLUB"
VQT4T12