Inserting The Battery - Panasonic Lumix DMC-TZ37 Operating Instructions Manual

Preparations

Inserting the battery

To charge the battery, insert it into the camera.
Slide the release lever to the
[OPEN] position and open the
card/battery door
Insert the battery all the way
• Make sure to insert the battery in the
correct orientation.
• Insert the battery all the way firmly until
a locking sound is heard, and check that
the lever is hooked over the battery.
Close the card/battery door
• Slide the release lever to the [LOCK]
position.
■
To remove battery
Move the lever in the card/battery
compartment in the direction of the arrow.
●
Always use genuine Panasonic batteries.
●
If you use other batteries, we cannot guarantee the quality of this product.
●
Remove battery from camera after use.
• Keep the battery in a plastic bag, making sure that it is kept away from metallic objects (such as
clips) when carrying or storing the battery.
●
To remove the battery, turn the camera off and wait until the LUMIX indicator on the
LCD monitor goes off. (Failure to wait may cause the camera to malfunction and may
damage the card or recorded data.)
- 17 -
Charging battery
Release lever
[OPEN] [LOCK]
Lever
VQT4T12