Table of Contents
Advertisement
Handset Settings
Time settings
Alarm
An alarm will sound for 3 minutes at the set time
once or daily. Set the date and time beforehand
(page 14).
1
Press {j/OK}.
2
Select "Handset Setup", then press {>}.
3
Select "Time Settings", then press {>}.
4
Select "Alarm", then press {>} 2 times.
5
Select an alarm mode, then press {>}.
– "Once": The alarm will sound once at the
set time. Enter the desired day and month
by selecting 2 digits for each.
– "Daily": An alarm will sound daily at the
set time.
– "Off": Turns the alarm off. Press {>}
again, then press {ih} to finish.
6
Enter the desired hour and minute by
selecting 2 digits for each.
L You can select "AM", "PM" or 24-hour time
entry by pressing {*} repeatedly.
7
Press {j/OK}.
8
Select the ringtone that will sound at the set
time, then press {>}.
9
Select "Save", then press {>}.
10
Press {ih}.
Note:
L To stop the alarm, press any dial key.
L When in talk or intercom mode, the alarm will
not sound until the call has ended.
L The alarm will sound at the set time even when
the ringer volume is turned off.
L If you select "Once", the setting will change to
"Off" after the alarm sounds.
26
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Ringer setup
Ringer volume
1
Press {j/OK}.
2
Select "Handset Setup", then press {>}.
3
Select "Ringer Setup", then press {>}.
4
Select "Ringer Volume", then press {>}.
5
Press {e} or {v} repeatedly to select the
desired volume.
6
Press {>}.
7
Press {ih}.
To turn off the ringer
1
Follow steps 1 to 4 under "Ringer volume",
page 26.
2
Press {v} repeatedly until "Off" is
displayed.
3
Press {j/OK}.
Note:
L Alarms will sound and the handset will ring for
intercom calls and when paged even if the
ringer is turned off.
L When the ringer is turned off, "Ring Off" is
displayed.
Changing ringtones
You can change the ringtone used by the
handset.
"Ext. Ringtone": Selects the ringtone for
outside calls.
"Int. Ringtone": Selects the ringtone for
intercom calls.
1
Press {j/OK}.
2
Select "Handset Setup", then press {>}.
3
Select "Ringer Setup", then press {>}.
4
Select the desired item, then press {>}.
5
Select the desired ringtone, then press {>}.
6
Press {ih}.
Advertisement
Table of Contents
