Power Saving Mode (Eco Mode) "Off/On" Setting; Adjusting Sound Quality; (Bass/Treble); Adjusting The Volume Balance Of Right - Panasonic SC-HTX500 Operating Instructions Manual

Enter the setup mode before operations. (

Power saving mode (Eco mode) "OFF/ON" setting

This function reduces the power consumption in the
following sound modes.
• When the sound mode is "OFF".
• When the sound mode is set to "STANDARD "
or "NEWS " only.
✽ This function does not work when the sound
mode is set to "STADIUM ", "MUSIC " or
"CINEMA ".
1. Press [w][q] to select
and press [OK].
2. Press [e][r] to select "ON " or
"OFF " and press [OK].
ON : Using Eco mode (Factory setting)
OFF : Not using Eco mode
Adjusting sound quality (Bass/Treble)
1. Press [w][q] to select
and press [OK].
TREB
BASS : Bass
TREB : Treble
2. Press [e][r] for adjustment, and
press [OK].
Adjustment range: –6 to +6
Factory setting: 0
Note
• The bass can be adjusted by adjusting the subwoofer (SW ).
( page 14)
Adjusting the volume balance of
right and left front speakers
1. Press [w][q] to select
and press [OK].
2. Press [w][q] for adjustment, and
press [OK].
L : Front left
R : Front right
Move the bar to left and right on the display
to adjust.
• As the bar moves closer to "L ", the sound
moves to the left.
• As the bar moves closer to "R ", the sound
moves to the right.
Note
• The bar indication is approximate.
When you do not use VIERA Link "HDAVI Control"
(
operation by selecting "CTRL OFF ".
1. Press [w][q] to select
2. Press [e][r] to select "CTRL ON "
ECO MODE
• This setting becomes effective by turning off all equipment
once after the setting is changed.
• When "CTRL OFF " is set, the ARC function will be disabled.
Be sure to make the optical digital connection or analogue
connection. (
or
BASS
When both the HDMI cable and the optical fibre
cable are connected to the ARC compatible
(
set which digital input to use as a priority.
1. Press [w][q] to select
2. Press [e][r] to select "OPT FIX "
BALANCE
• If the connected TV is not compatible with ARC, the audio
input via the optical fibre cable is automatically selected even
if "AUTO " is set.
page 18)

VIERA Link "HDAVI Control" "OFF/ON" setting

pages 16, 17), you can set the unlinked
and press [OK].
or "CTRL OFF "and press [OK].
CTRL ON : When using (Factory setting)
CTRL OFF : When not using
Note
page 12)
Fixing the TV audio input to the
optical digital input
page 12) TV (VIERA) at the same time, you can
and press [OK].
and press [OK].
AUTO : The digital audio input via HDMI
cable (ARC) is used as a priority
when this input can be used.
(Factory setting)
OPT FIX : Only the optical digital input
terminal is used whereas the
digital audio input via HDMI cable
(ARC) is not used.
Note
HDMI
TV AUDIO
19
VQT2R75