Specifiying The Image Density - Konica Minolta BIZHUB 160 User Manual

Making copies

Specifiying the image density

1
Position the original.
For details, refer to "Loading originals" on page 3-25.
2
Press the [Auto/Photo] key on the
control panel to select the desired
mode. Each press of the [Auto/Pho-
to] key changes the setting as shown
at the right.
– If text mode is selected,
displayed.
– If the auto setting is selected,
is displayed.
– If photo mode is selected,
TO
mode, the auto setting cannot be
selected.
3
If you want to adjust the image den-
sity manually, press the [*] or [)] key
to select the desired setting.
The displays for manually selected
image densities are shown at the
right.
4
Specify the desired copy settings.
For details, refer to "Making a basic
copy" on page 4-3.
5
Using the 10-key pad, enter the
number of copies to be made.
6
Press the [Start] key
This will start the copy cycle.
bizhub 160/161
is displayed. In the photo
TEXT is
[A]
[A]
PHO-
Light -4
Standard 0
Dark 4
4
-3
-2
-1
1
2
3
4-13