Playing Back Your Recorded Song; Store A Chord Progression - Panasonic SX-KC611 Owner's Manual

Part III
Multiplex recording
Multiplex recording of the MELODY mode and APC
REAL mode is possible by repeating steps 1 to 6.
In multiplex recording, recording cannot be started by
playing the keyboard. You
START/STOP button to begin recording.

Playing back your recorded song

1. In the SONG section, press the PLAY button.
SONG
PLAY REC
This step is not necessary if the PLAY indication al-
ready appears on the display.

Store a chord progression

Store the chord progression for the AUTO PLAY CHORD in the track for the CHORD part. Then, when the AUTO
PLAY CHORD is used during playback, even if you do not specify the chords with your left hand, the chords change
automatically.
The chord length is specified with the CHORD STEP RECORD keys on the keyboard.
DELETE
Note value keys
Whole note
.
Dotted half-note
Half-note
.
Dotted quarter-note
Quarter-note
Eighth-note
Reset key
Press to begin storing from the beginning.
Note that executing this procedure will delete the recorded APC REAL data.
34
QQTG0588
must press the
2.
Press the PLAY/PAUSE (START/STOP) button.
Your recorded performance is played back.
For information about the function of each button
during playback, refer to page 37.
If you wish to play back the rhythm, turn the PLAY
button off.
Correction keys
Repeat key
End key
DELETE key
DELETE
To erase all the data from the current track, while
pressing the DELETE key, press the End key
(
Recording
Move back one step.
Move forward one step.
Press to end the chord-storing procedure and
to specify automatic repeat playback of the
stored progression.
Press after the whole chord progression has
been stored.
Press to erase data.
).