Rhythm Performance - Panasonic SX-KC611 Owner's Manual

Part II

Rhythm performance

Intro, fill-in and ending patterns are available for each rhythm.
INTRO
Begin the rhythm performance with an intro pattern.
1.
Press the INTRO/ENDING button to turn it on.
The mark next to the INTRO/ENDING indication
on the left side of the display indicates that this function
is on.
2.
Press the START/STOP button to start the rhythm.
An intro pattern is played, after which the normal
rhythm pattern begins.
COUNT INTRO
You can begin the rhythm performance with a one-
measure count.
1.
Press the FILL IN 2/COUNT INTRO button to turn it
on.
The mark next to the COUNT indication on the left
side of the display indicates that this function is on.
2.
Press the START/STOP button to start the rhythm.
A one-measure count is played, after which the normal
rhythm pattern begins.
Playing the rhythm
FILL IN
You can insert a fill-in pattern any time during the rhythm
performance. Choose from two different fill-in patterns.
1.
Select a rhythm and press the START/STOP button.
2.
Press the FILL IN 1 or 2 button.
A fill-in pattern is heard immediately for the remainder
of the measure.
When a FILL IN button is pressed on the last beat of
the measure, the fill-in pattern continues to the end of
the following measure.
ENDING
Finish the rhythm performance with an ending pattern.
1.
Select a rhythm and press the START/STOP button.
2.
Press the INTRO/ENDING button to turn it on.
An ending pattern is produced, and then the rhythm
performance stops.
If you accidentally press an INTRO/ENDING button in
the middle of the tune, you can press the FILL IN 1
or 2 button. The ending pattern stops, and a fill-in
pattern is produced, after which the normal rhythm
performance continues.
27
QQTG0588