Copy Your Tapes (Dubbing) - Panasonic PV-C2522-K Operating Instructions Manual

Copy Your Tapes (Dubbing)

*Important: If a remote control button does not work when pressed,
press the COMBO button on the remote and try the button again.
Connections you'll need to make.
Playing (Source) VCR
AUDIO VIDEO
OUT
IN
Playback (Source)
1
Insert pre-
recorded tape.
2
3 Press PLAY then
PAUSE at starting
point to put in
Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
4 Press PLAY
to start dubbing.
5
Press STOP
to stop dubbing.
STOP
Caution
• Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Recording (Editing) unit
IN FROM ANT.
VIDEO IN
OUT TO TV
Recording (Editing) unit
Insert blank tape with
record tab.
• Dubbing tapes protected
Select "LINE" mode.
See "Selecting Input Mode" below.
Press REC, then
PAUSE/SLOW
immediately to put in
Standby mode.
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH . The display will change as follows.
LINE
Method 2:
a Press ACTION for MAIN MENU.
b Press to select "TV", then press
ACTION for SET UP TV screen.
c Press
to select "INPUT SELECT," and
then press to select "TUNER" or "LINE."
d Press ACTION twice to exit this mode.
AUDIO IN
AUDIO IN
with Copy Guard will have
poor quality results.
1
2 3
(CABLE)
(TV)
or
125 69
13