Copy Your Tapes (Dubbing) - Panasonic PV-C921-K Operating Instructions Manual

Copy Your Tapes (Dubbing)

Connections you will need to make
are illustrated below.
Playing (Source) VCR
AUDIO VIDEO
OUT
IN
Playback (Source)
1
Insert pre-
recorded tape.
Our Vacation
2
3
Press PLAY then
PAUSE at starting
point t
Standby mode.
(Perform operation of steps 4 and 5 on both units simultaneously.)
4 Press PLAY
to start dubbing.
5
Press STOP
to stop dubbing.
STOP
Caution
• Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
IN FROM ANT.
OUT TO TV
Recording (Editing) unit
Select "LINE" mode.
See "Selecting Input Mode" below.
o put in
Selecting Input Mode
Method 1:
Press CH . The display will change as follows.
Method 2:
a Press ACTION for MAIN MENU.
b Press
for SET UP TV screen.
c Press to select "INPUT SELECT," and
then press
d Press ACTION twice to exit this mode.
Recording (Editing) unit
VIDEO IN AUDIO IN
AUDIO IN
Insert blank tape
with record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
Press REC, then
PAUSE/SLOW
to put in
immediately
Standby mode.
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.
1
2 3
(CABLE) (TV)
LINE 125 or
69
to select "TV", then press ACTION
to select "TUNER" or "LINE."
15