Panasonic PV-C2522-K Operating Instructions Manual page 23

*Important: If a remote control button does not work when pressed,
press the COMBO button on the remote and try the button again.
REW FF
Auto Operation Functions
I Auto Shut Off
No broadcast signal in TV (only when Weak
Signal Display is set to OFF),
played for 5 minutes
Power turns off
• This feature is cancelled if any button is
pressed during above mode.
I Auto Playback
Insert a tape in Power off mode
Power turns on
• Playback begins if tape has no record tab.
Auto Rewind (except for Recording)
I
Tape reaches its end
Rewind, Stop
I Playback Auto Eject
(Repeat Play is "OFF")
Tape with no record tab reaches its end
Rewind, Stop, Eject
Tape Position Display
To find out present tape position and amount of
tape remaining.
Tape position is displayed for VH -C cassettes
type, tapes under 30 minutes, and some other
tapes, but the position is not correct.
1
Press TAPE POSITION
to detect current tape position.
• "DETECTING TAPE
POSITION" is displayed only
DETECT I NG TAPE POS I T I ON
when a cassette is first inserted
and it takes several seconds for
correct tape position to appear.
• The present tape position
indication and amount of tape
SLP
remaining (according to tape
R 120 MIN.
speed) is displayed.
• Tape remaining time display
BEG I N END
may not be precise.
2
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
Note
• This function cannot display exact amount of
tape remaining for tapes 30 minutes or less,
or for tapes over 120 minutes in length.
blank tape is
VHS
23