Timer Recording - Panasonic OmniVision PV-C2023-K Operating Instructions Manual

Timer Recording

You can set up to 8 programs to be recorded while you are
away.
Press PROG to display SET PROGRAM screen.
1
SET PROGRAM
2
T I MER PROGRAMMING
ON TIMER
SELECT :
END : PROG
3
DATE START STOP
7 FR I --:-- --:-- --
TODAY
- - - - - - - - -- - - - - - - -- - - - - - -
SELECT : SET :
END : PROG
Example
8
SELECT
Today's
7
Date
WEEKLY
(SAT)
Repeat step 3 to set:
• Start time, Stop time
• Channel (or LINE for outside source)
• Speed (SP, LP, SLP)
4
P DT START STOP
1 day 9 : 00 p 12 : 00a 08
2 -- -- : -- -- : --
3 -- -- : -- -- : --
4 -- -- : -- -- : --
CANCEL : ADD / DLT
SELECT :
END : PROG
Press PROG twice to exit this mode.
5
• If you're using a cable box, make sure that it is tuned
to the desired channel and the power is left on for timer
recording.
• PROG TIMER indicator lights on the unit.
22 22
1) Press to select
TIMER
PROGRAMMING.
2) Press to display
screen.
• If a program is already in
SET :
memory, press
select an unused program
number.
Press to select and
CH
or to set the
recording DATE.
SP
• 1~31 = One time
• DAILY = MON~FRI
• WEEKLY SUN~SAT
= Same time once a week
9 2 6
31 1
/ Selection Order
DAILY
WEEKLY WEEKLY
(MON) (SUN)
Press PROG to
CH SPD
SP end the program.
-- --
-- --
-- --
To Enter More Programs,
press to select
SET :
and to set a blank
program number, and
then repeat step 3.
Check List
Cable or antenna is connected.
Power cord is plugged in.
The clock is set to correct time.
The tape is long enough.
The record tab is in place.
, and to
VIDEO IN AUDIO IN
POWER VOL CH STOP/EJECT REW/ PLAY/REPEAT FF/ REC TIMER/FM
REC ON TIMER PROG TIMER
ACTION
PROG TIMER indicator