Veilux VPIP-D118-/O User Manual page 35

II. Connection via NVXR-64
NVXR-64 is a CMS program to connect several IP Cameras and/or Video Servers. Once you run
NVXR-64 after installing on the remotely located PC, you can monitor real-time Video/Audio on the PC
by accessing to IP Camera via IP Address assigned to each IP Camera. For the access to Product by
using NVXR-64, you have to configure all required information at NVXR-64.
For the detail, please refer to [NVXR-64 User Manual].
4. Initial Configuration by connecting Admin Mode
All Parameters of Veilux VPIP-D1XXX-O / VPIP-D1XXX-I is initially set as factory default. So you must change
them with appropriate value to your network configuration by accessing via Admin Tool. Admin Tool Access
Method is as below.
Admin Tool Access ID / Password:
Some units also may have
Website: www.Veilux.net
Veilux User Manual for VPIP-D118-/O, D126X-I/O, D127X-I/O, D133X-I/O,
D136X-I/O, D136X With WDR-I/O, D137X-I/O
I= Indoor D= Outdoor
Http://[IP Address]:[HTTP Port No.]/ admin.htm
root / admin. As it is Default Value, please change them. For the detailed
User Name and Password is set as 'root' and 'dw2001'
Phone# 1-800-510-6528
Admin Page Button
Fig 4-3. NVXR-64
Rev.1.0 (April 2011)
35