Functional Description - Veilux VPIP-D118-/O User Manual

2 2 . . 4 4 . . F F u u n n c c t t i i o o n n a a l l D
 AC Power
Connect 24 Volt AC adaptors to this terminal for supplying power to the network camera.
AC adapter which is compliant to the specification for Veilux VPIP-D1XXX-O / VPIP-D1XXX-I
should be used. Misuse of power supply can cause damage to Veilux VPIP-D1XXX-O / VPIP-
D1XXX-I. Veilux assumes no responsibility for misuse of the power supply.
 MIC/LINE IN
Connect external audio source or microphone.
 Line Out
Connect speakers with built in amplifier. Audio from remote site is output through Line out in bi-directional
audio mode.
 100Base-T
100Mbps Ethernet connector (RJ-45). 2 LEDs on the Ethernet connector shows the status of Veilux VPIP-
D1XXX-O / VPIP-D1XXX-I as the followings:
-
Status LED (Dual Color - Red/Green): It will be lit in green or red depending on the status.
 Green: Green color indicates that the camera is in normal operation mode. Continuous green
 Red: Continuous or blinking red indicates that hardware is in abnormal condition.
Red/Green LED will be lit with red momentarily and it will be lit with green after a while when
power is applied into Veilux VPIP-D1XXX-O / VPIP-D1XXX-I.
LINK/LAN LED (Orange) : It will be lit with orange color when network cabling is all right. Blinking
orange color indicates that normal data transmission is under way. Off state indicates that there is
trouble in network connection.
Website: www.Veilux.net
Veilux User Manual for VPIP-D118-/O, D126X-I/O, D127X-I/O, D133X-I/O,
D136X-I/O, D136X With WDR-I/O, D137X-I/O
I= Indoor D= Outdoor
D e e s s c c r r i i p p t t i i o o n n
Indicates that data transmission is possible. Blinking green means that someone is
Connected to Veilux VPIP-D1XXX-O / VPIP-D1XXX-I.
Phone# 1-800-510-6528
Rev.1.0 (April 2011)
19