Telepen Output; Telepen Message Length - Hand Held Products IT3800 User Manual

Telepen

Telepen Output

Using AIM Telepen Output, the scanner reads symbols with start/stop pattern 1
and decodes them as standard full ASCII (start/stop pattern 1). When Original
Telepen Output is selected, the scanner reads symbols with start/stop pattern 1
and decodes them as compressed numeric with optional full ASCII (start/stop
pattern 2). Default = AIM Telepen Output.
* AIM Telepen Output

Telepen Message Length

Note: Scan the bar codes below to change the message length. Refer to
Message Length Description
Minimum and Maximum lengths = 1-60. Minimum Default = 1, Maximum
Default = 60.
Minimum Message Length
7 - 20
* On
Original Telepen Output
(page 7-2) for additional information.
Maximum Message Length
IT3800/3900 User's Guide
Off