Table of Contents
Advertisement
1. Select the channel position with numeric buttons
2. Select the channel with Channel Up / Down button
3. Search with
/
4. Select
Store
with
If a VCR is connected only with the RF cable, select channel position 0.
●
Update Channel List
By updating the Digital TV channel list, you can add new channels, delete
removed channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel
List,
Child
Depending on the signal condition, the update may not work properly.
●
New Channel Message
Selects whether to give a notification message when a new Digital TV
channel is found.
When a notification message appears, you can perform
●
List
pressing OK.
Sometimes, mainly during summer months at night, the TV may pick up
●
distant TV stations outside your broadcast due to favourable short term
ionosphere conditions. In such circumstances when you press OK, the TV
does not add any new channels. This is normal.
Signal Condition
Selects a channel and checks the signal condition.
A good Signal Strength is not an indication of suitable signal for Digital TV
reception.
Use the Signal Quality indicator as follows.
●
– Green bar: Good
– Yellow bar: Poor
– Red bar: Bad (Check the aerial)
Vertical lines show the maximum signal value of the selected channel.
●
To change the channel
●
/
and press
OK
to set
Lock, etc.
- 30 -
Favourites
Edit,
Update Channel
Advertisement
Table of Contents
