Table of Contents
Advertisement
■
To change the aspect ratio manually
1. Display
Aspect Selection
2. Select the mode with
You can also change the mode pressing ASPECT.
●
(Press repeatedly until you reach the desired mode.)
16:9:
Directly displays the image at 16:9 without distortion (anamorphic).
14:9:
Displays the image at the standard 14:9 without distortion.
Just:
Displays a 4:3 image full-screen. Stretching is only noticeable at the left
and right edges.
4:3:
Displays the image at the standard 4:3 without distortion.
Zoom:
Displays a 16:9 letterbox or 4:3 image without distortion.
4:3
Full:
Displays a 4:3 image enlarged horizontally to fit the screen.
For HD (High definition) signals
●
Sidecut
Just:
Displays a 16:9 letterbox (anamorphic) image full-screen. Stretching is
only noticeable at the left and right edges.
For HD (High definition) signals
●
Sidecut
Zoom:
Displays a 16:9 letterbox (anamorphic) image full-screen without distortion.
For HD (High definition) signals
●
= Note =
Aspect mode can be memorised separately for SD (Standard definition)
●
and HD (High definition) signals.
Advanced Settings
You can adjust and set up the detailed picture settings for each input when
Viewing Mode
is set to
Watching
1. Select the input mode with
list with
ASPECT
/
and press
True Cinema
or Custom.
For best picture
Viewing Mode
AV
or
TV
- 21 -
OK
to set
Advertisement
Table of Contents
