Table of Contents
Advertisement
Last view
Switch to a previously viewed channel or input mode easily with
Press again to return to the current view.
●
= Note =
Watching less than 10 seconds is not reflected in the previously viewed
●
channel or input mode.
Adjusting time
■
Adjust the standard time
Select the region where you live to adjust the standard time. (Base on GMT)
1. Display the menu with
2. Select
Timer
Clock Settings
to access
3. Select the region with
NSW / ACT
/
Victoria
Northern Territory
The time contained in the broadcast signal is UTC (Universal Time
●
coordinated) formally known as GMT (Greenwich Mean Time).
NSW / ACT
/
South Australia
Western
Australia: +8:00
■
Adjust for Summer Time
Select time offset from the standard time for Summer Time. (Base on GMT)
1. Display the menu with
2. Select
Timer
Clock Settings
press
OK
to access
3. Select
Auto
/
Off
If there is a gap between displayed time and actual time, set this function.
●
Normally select
Auto
●
Region
Select.
NSW / ACT
/
Victoria
South
Australia: +10:30
Queensland: +10:00
Northern
Territory: +9:30
MENU
Region Select
/
and press
/
Queensland
/
/
Tasmania
Victoria
/
Queensland
/
Northern
Territory: +9:30
MENU
Daylight Saving Time
/
+ 1/2 hour
/
+ 1 hour
to adjust as following for the region has been set in
/ Tasmania: +11:00
- 14 -
with
/
OK
to set
South Australia
/
Western Australia
/ Tasmania: +10:00
with
with
/
and press
LAST
VIEW.
and press
OK
/
/
and
OK
to set
Advertisement
Table of Contents
