Suitable Laminating Pouches; Operating Levels - Lervia LAMINATOR KH 4410 Operating Instructions Manual

KH4410_Laminator_UK
Lervia KH 4410
Fire hazard!
• Do not use the appliance near hot
surfaces.
• Do not keep the appliance in places
that are exposed to direct sunlight,
as this could lead to overheating and
cause irreparable damage.
• Do not leave the appliance unattended
when in use.
• Never cover the ventilation slits on the
top of the appliance while it is on.
Injury hazard!
• Keep children away from the connecting
cable and the appliance. Children
frequently underestimate the danger
from electrical appliances.
• Make sure to find a safe place for the
appliance.
• Do not operate the appliance if it has
sustained a fall or is damaged. Get the
appliance checked and repaired by
experts, if necessary.
• Some parts of the appliance become
very hot during operation. To avoid
burns, do not touch these parts.
09.06.2006 9:23 Uhr Seite 6

6. Suitable laminating pouches

• You can use laminating pouches with a
width of up to 230 mm and a thickness
of max. 2x 125 (250) micron.
• Please note that each laminating
pouch may only be used once for
laminating.
For hot lamination, use only lamina-
ting pouches that are expressly
intended for hot lamination.
For cold lamination, use only lamina-
ting pouches that are expressly
intended for cold lamination.
Note that the laminating pouches
included with the laminator are
intended exclusively for hot
lamination.

7. Operating levels

Switch setting
80
Cold
125
Tip: For high-gloss photos, select the
switch setting "125".
- 6 -
Laminating pouch
thickness
> 60 - 80
to 200
85 - 125