Anti Block System (Abs); Cleaning And Care - Lervia LAMINATOR KH 4410 Operating Instructions Manual

KH4410_Laminator_UK
Make certain that there is at least
30 cm of open space in front of the
laminator. Otherwise the laminating
pouch will not be output completely
from the laminator after lamination.
This could damage the laminated
pouch.
➩
The laminated pouch is output from
the pouch ejector slot
laminator.
(Only after hot lamination) When
the laminated pouch is output from
the pouch ejector slot
nator, it is still hot and its shape
may change slightly. For this reason,
let the laminated pouch cool for one
minute before touching it.
To improve the lamination result,
you can weigh down the still hot
laminated pouch with a book, a file
folder or another heavy, flat object.
This achieves a flat, flawless surface.
09.06.2006 9:23 Uhr
of the
of the lami-
Seite 9

11. Anti block system (ABS)

At the start of the lamination process,
the pouch may be pulled in at an angle
or jam up inside the appliance.
➩
Press the Anti block switch (ABS)
upward.
• The pouch is then released again.
➩
Pull out the pouch, then release the
Anti block switch
➩
Start the lamination process over.

12. Cleaning and care

Life-threatening danger of electrical
shock:
• Never open the appliance housing.
There are no operating elements
inside.
• Never immerse the appliance com-
ponents into water or other liquids!
Cleaning the casing:
Clean the surface of the casing with
a slightly damp wash cloth.
➩
First pull the power plug.
➩
Let the appliance cool down
completely.
➩
Make certain that no moisture en-
ters into the inside of the
appliance.
- 9 -
Lervia KH 4410
.