Additional Call Features; Call Timer; Low Battery Warning - Logitech Cordless internet handset Owner's Manual

Cordless internet handset for skype
Table of Contents

Advertisement

Additional call features

• Call timer

The call timer shows the duration of your current call on display.
• Out of range warning
If you move too far away from the base unit during a call, your phone will sound an alert tone, and
will flash. You need to move closer to the base unit or your call will be disconnected.
NOTE: If the handset cannot find the base in 30 minutes, it will automatically turn itself off and user will
have to manually turn it on again.

• Low battery warning

If your phone is almost out of battery during a call, it will sound an alert tone. Place your phone on the
charger for charging as soon as possible or it will turn off when it is out of battery. Placing the phone on
the charger for charging will end the current call.
• Transfering a call from the PC to the handset
Calls answered or made on the handset cannot be transferred back to the PC. For your convenience,
however, calls made or answered on the PC can be transferred to the handset by following these steps:
1. "Right click" (click your right mouse button) on the Logitech® Internet Handset in the system tray.
2. Select "Transfer to handset" and answer handset.
Preparatory dialing for SkypeOut™ (pre-dial)
With pre-dial, you can see and edit the number you are calling on the display before dialing it through
SkypeOut™.
1. Enter the number you want to call. The number appears on the display.
• Deleting Digits
Press CLEAR to delete an incorrect digit. If you press CLEAR on the last digit, your phone will return to
standby.
• Entering a Pause
Press and hold # (KEY LOCK & PAUSE) Key where you want to enter a pause.
2. Press the TALK key to make the call.
Saving a number from pre-dial:
1. Enter the number in standby. The number appears on the display.
2. Press Save.
NOTE: If you encounter the "Memory Full" message, then you can not enter a new number.
3. Enter the name for the record. Refer to section 6: Entering letters & special characters. A name must be
entered and it must be unique.
4. Press Down to go to the next field.
5. Edit the number for the record if necessary. You must enter a number.
6. Press Down. Press Left or Right to select a VIP melody for the record.
16
7. Press Save to confirm. The phone returns to standby.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents